Chain structure DMLS 3D Printing Service Direct Metal Laser
1. DMLS is also one of the few additive manufacturing technologies
being used in
production. Since the components are built layer by layer, it is
possible to design internal features and
passages that could not be cast or otherwise machined.
2. Compared with traditional manufacturing techniques, the speed of
DMLS is the most
obvious because no special tooling is required and parts can be
built in a matter of hours.
3. DMLS allows for more rigorous testing of prototypes. Since DMLS
can use most alloys, prototypes can now
be functional hardware made out of the same material as production
4. Complex geometries and assemblies with multiple components can
be simplified to fewer parts with a
more cost effective assembly. DMLS does not require special tooling
like castings, so it is convenient for
short production runs.
· Metal parts, fire test parts, fixture direct manufacturing and
model demonstration test.
· Development of new products.
· Creative design and display of culture, creativity, clothing,
household goods and other.
· Research and development of implants, teeth, skull repair,
prosthetics and medical
· Product design, rapid production of high-precision injection
Technical Specifications for Direct Metal Laser Sintering
Technique Specifications of EOSINT M 280
250 mm x 250 mm x 325 mm
(9.85 x 9.85 x 12.8 in)
|building platform||9.85 x 9.85 x 12.8 in|
Yb-fibre laser, 200 W oder 400 W (optional)
F-theta-lens, high-speed scanner
up to 7.0 m/s (23 ft./sec)
Variable focus diameter
100 - 500 μm (0.004 - 0.02 in)
maximum 8.5 kW / typical 3.2 kW
Compressed air supply
7,000 hPa; 20 m3/h (102 psi; 706 ft3/h)
4,000 hPa; 100 l/min
(58 psi; 3.5 ft3/min)(optional)
Service Step for a Project
Rapid Prototyping & Manufacturing Process
Inspection Equipment-Three coordinate measuring
For its high precision flexible three coordinate measuring
technology and excellent digital capability, become
a modern manufacturing especially mold industrial design,
development, manufacture and quality assurance.
YanHua company now in U.S. FARO company produces the Platinum FaroArm 2.4 m joint arm type
measuring instrument, measurement
accuracy of + / - 0.03 mm.
Three coordinate measuring machine can be applied to 3 d digital
analog input, will the molding samples or
related to the da location, size, shape tolerance, curve and curved
surface are compared, and measuring the
output graphical reports, intuitive clearly reflect the quality of
the products, thus forming a complete sample test
We produce the products or samples according to your requirements. If our products can not reach your
requirements ,two solutions as follow:
1, we will produce your products again until reaching your
reuirments for free.
2, we give the refund and you send us our products by international